|
|
The Plate & Shell® Openable version
offers increased flexibility of use by allowing the fully welded
platepack to be completely
withdrawn from the shell for inspection or cleaning. This is
achieved by the use of a flanged and bolted shell construction.
The cassette type platepack allows quick and easy removal and
refitting thus ensuring that process downtime is kept to a minimum. |
- Bolted shell construction allows removal of platepack
- Fully welded on plate side of unit
- Area required for platepack removal considerably smaller
than for shell & tube bundle
- Design pressure up to 100 bar
- Standard design temperature -80°C to +400°C. Higher
for special cases
- Very compact - 300m² heat transfer area / m²
- Capacity up to 100MW / unit with up to 1800m² / unit
- Significant space saving & weight compared to tubular
units
- Economic to maintain - very quick to open and no gaskets
to replace
- Liquid/ liquid processing
- Condensers
- Evaporators
- Cascades
- Fouling service
- Gas/ Liquid
|
|
|
|
